This new model Ellis 36 Express boasts 6′ 6″ of headroom throughout the shelter, cabin, and separate shower. It includes bar/office seating in the cabin, a fully automated davit system (PrestoMarine) which carries an AB Aluminum tender with Suzuki outboard, and a transom door for easy access to a large swim platform. This Ellis 36 also features a single Yanmar diesel engine, 5-blade prop, full keel/skeg protecting prop/rudder, and bow & stern thrusters.
2019 Ellis 36′ Express Cruiser
Length overall 40’ 5” • Length on deck 35’10” • Length waterline 33’ 4”
Maximum beam 13’ 2” • Draft (keel) 3’10” • Displacement 16,000 lbs.
Diesel fuel 210 gallons • Potable water 100 gallons • Wastewater 36 gallons
Cruise 10-19 knots • Max speed 23 knots
THIS VESSEL HAS SOLD
SPECIFIC FEATURES
• A new cabin layout with a 2-seat “breakfast bar” in the cabin.
• 6′ 6″ of headroom in the Cabin and Shelter!
• Single Yanmar 440 diesel engine, 5-blade prop, and high-speed rudder.
• Full keel/skeg protecting prop and rudder.
• Bow & stern thrusters for easy maneuverability.
• Transom door, swim platform, and tender on the push-button davit system.
• Spacious head with a separate shower.
• Efficient 10 to 20 knots cruising speeds.
• Ellis dining setup in pilothouse (seats up to 8 people).
• Consistent handling thanks to the Ellis semi-displacement hull design
NEW Ellis 36 Express Cruiser
FULL SPECIFICATIONS
HULL:
- Semi-displacement with integral fiberglass skeg protecting the shaft, prop & rudder
- 1° dead-rise at the transom
- ISO NPG gel coat (WHITE) with blister-resistant vinyl ester resin – base white
- High-tech composite with stitched biaxial E-Glass construction for superior strength
- Solid Hull – layup… 1 – mat with Amorall Blend, 1 – 1708 with Amorall Blend, 1 – 1808 with Amorall Blend, 4 – 3205 with GP, 1 – mat with GP
- Stitched biaxial structural E-Glass reinforced stringer system
- Gel coat finished bilges for ease of maintenance
- Fiberglass swim platform with gel coat non-skid surface.
- Stainless Steel swim ladder
- Linear Polyurethane boot stripe – Red Mahogany
- Metal-free biocide antifouling bottom paint system – Light Gray to match rails
DECK:
- ISO NPG gel coat with vinyl ester resin – base white
- High-tech composite with stitched biaxial E-Glass construction for superior strength
- Vacuum bagged ATC Core-Cell® structural foam core
- Gel coat non-skid surface
ENGINE SYSTEM:
- 440-hp Yanmar, transmission, & alternator required for all boat systems
- Oil catch basin under the engine
- Stainless steel shaft system with cutters
- 26” 5-blade magnesium-bronze propeller
- Groco 2” raw water intake strainer
- Engine air intake through aft cockpit grills
- White gel coat finished engine room
- 2″ Soundown™ sound insulation on the main bulkhead, under all floor panels & hatches
- All-access hatches lined with acoustical gaskets
- Engine compartment cooling through side-mounted dorads, molded fiberglass
- All thru-hulls isolated with solid glass to ensure the integrity of Core-Cell® core
- Ball valve style silicon bronze sea-cocks with double hose clamps
FUEL SYSTEM:
- (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks
- 900 Series Racor 30-micron primary fuel filter/water separator
- Yanmar 2-micron secondary fuel filter/water separator
- (2) 2” 316 polished stainless steel diesel deck fills
- USCG approved, fire-resistant fuel hoses with double hose clamps
STEERING SYSTEM:
- Hydraulic power steering system
- 316 stainless steel rudder (1½” diameter rudder post)
- Sidepower Electric bow thruster
- Stern Thruster – Sidepower
- Dual Sidepower Thruster Helm Control.
FORWARD CABIN:
- Ellis Plugs pulled for extra height (increased to 6′ 6″)
- 7′ 6″ V-berth with 6” covered cushions with memory foam & breathable top layer – Burgandy
- Teak V-berth shelves
- Drop-in storage compartments under V-berth cushions
- Teak drawers and drop-down lockers under V-berth
- Chain locker forward with teak louvered door
- Hanging locker with 3 shelves, hanger pole & teak louvered door.
- Fiberglass Floor with Non-skid in white
- Gloss Panel headliner with teak trim
- Bomar hatch(es) with self-contained OceanAir® sunshades and screens
GALLEY:
- Molded fiberglass counter with teak fiddle rail and trim
- Hand-polished stainless steel double sink with faucet
- Teak drawers and storage lockers
- Teak trimmed sliding door storage cabinet
- 12-volt DC Isotherm Refer/Freezer
- Wallas Diesel flush Nordic Dt cooktop with blower lid heater
- Hot and cold pressurized water
- Plate and bowl storage rack
- Tumblers and glassware
- Teak towel ring
HEAD:
- Teak sliding door
- Molded fiberglass counter with teak fiddle rail and trim
- 13” hand-polished 304 stainless steel sink with washer-less Moen faucet (or similar)
- Teak drawers and storage lockers below the counter
- Teak trimmed sliding door storage cabinet
- Teak framed mirror above the sink cabinet
- Separate molded fiberglass shower with seat
- Showerhead & mixing valve
- Hot and cold pressurized water
- Separate shower sump
- (2) Stainless steel towel bars
SHELTER:
- Increased shelter height (6′ 6″ in the shelter)
- Express Cruiser Style – Hardtop w/side curtains & 3-panel backdrop + Eeisenglass panels.
- GLOSS PANEL headliner with teak trim
- Cap Rail – Inside Teak, transition capped with stainless steel
- Port & starboard Ellis Cantilevered Hydraulic Seats (Varnished Teak) with covered cushions
- (2) Teak trimmed sliding door storage lockers
- Teak companionway doors and cover, removable teak companionway stairs
- (2) 30” x 48” folding teak tables mounted on port and starboard cabin sides
- (2 or 4) Light fixtures Overhead
- (3) Large (26½” x 61”) engine room hatches w/gas struts, 4” diameter stainless compression latches/hinges (removable hatch irons create a single 86” x 61” opening)
- (25” x 25”) shaft access and storage hatch with gas struts, 4” diameter stainless steel compression latch and hinges
- (3) front powder-coated aluminum opening windshields
- (3) 2-speed, self-parking, pantograph windshield wipers with washers
- (2) powder-coated aluminum side windows
- Fiberglass floor with gel coat non-skid surface (white)
- Linear Polyurethane side stripe – Red Mahogany
HELM STATION:
- Enclosed cabinet with teak top and fiberglass instrument insert
- Teak trimmed electrical, electronics and hydraulic access panel
- Sidearm cabinet for hydraulic seats and additional electronics
- Ellis adjustable teak and hand-polished stainless steel footrest
- Yanmar Single lever control
- Engine control panel
- Lighted Ritchie 4½” Binnacle compass
- Windlass and air horn controls
- Operators electrical control panel
- 24” stainless steel destroyer wheel
- Ellis designed “Pump Running Indicator Light System”
NAVIGATION STATION:
- Enclosed cabinet with top storage compartment with hinged teak cover
- Teak trimmed electrical access panel – Lift out or latched panels
- Sidearm cabinet for hydraulic seats, additional electronics.
- Ellis adjustable teak and hand-polished stainless steel footrest.
COCKPIT:
- One large lazaret hatch with gas struts, 4” diameter stainless steel compression latches and hinges (84” x 25½” opening)
- Fiberglass floor with gel coat non-skid surface
- A high-pressure pump supplies saltwater to bow and cockpit faucets
- Freshwater faucet/connection in cockpit
- Cockpit shower with a recessed mixing valve.
- Transom door – opens inward.
- 4 varnished teak/canvas deck chairs that are capable of fitting in port or starboard cockpit storage. Canvas = Sunbrella Storm with Burgundy Ellis Logo embroidered in backs.
- Aft seating (teak – gloss varnished) with Sumbrella Storm fabric (doubles for an extra berth in the shelter)
DECK HARDWARE:
- Ellis Bow Pulpit and Bow Rail
- (2) 1″ diameter type 316 stainless steel handrails on the cabin top
- (2) 1″ diameter type 316 stainless steel handrails on front corners of the shelter
- (4) 10” 316 polished stainless steel cleats (2 amidships, 2 aft)
- (1) 7” 316 polished stainless steel bow bitt
- (2) 6” 316 polished stainless steel skene bow chocks
- (2) 316 polished stainless steel fender eyes amidships
- Polished stainless steel flagpole holder, ferruled teak flagstaff and 3’x5’ U.S. flag
- Anchor roller & windlass (foot and helm controls)
- 33-lb anchor with 150’ of 5/16” chain and 150’ of 5/8” nylon
- (6) Polished 316 stainless steel opening portlights with angled spigots and screens
- High impact PVC guards and rails (light gray)
- Polished stainless steel half oval on all guards and rails.
WASTE DISPOSAL:
- 36-gallon holding tank with overboard discharge macerator pump
- 1½” Scandvik polished stainless steel deck pump-out
- Groco Manual Head
- All gray water drainage through 2 isolated thru hulls
FRESHWATER SYSTEM:
- (2) freshwater tanks
- 12-gallon hot water tank
- FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe system
- 3.8 GPM 12-volt DC SHURflo water pump
- 1½” polished stainless steel deck fill plate
12-VOLT DC ELECTRICAL SYSTEM:
- 4D dedicated engine starting battery and 8D deep cycle house battery
- USCG & ABYC approved polyethylene battery boxes
- Heavy-duty battery switch (Mounted on side of Nav Station) with parallel capabilities for emergency starting. SWITCH: #1 – Engine, #2 – House, and BOTH
- Illuminated DC circuit breaker panel with flush breakers and digital monitor
- DC subpanel on sidearm at the helm
- (5) 12-volt DC outlets and USB power at the helm, at the nav station, in nav station, and in galley area forward and aft.
- 12-volt DC dual trumpet air horn
- USCG approved running lights
- USCG approved 360° masthead light
- (3) 750 GPH bilge pumps; (1) located forward of the main bulkhead, (1) in engine compartment just aft of engine, (1) auxiliary pump located just forward of the engine.
ELECTRONICS
- Garmin VHF, Plotter, Radar, and Sounder
LIGHTING:
- 5½” stainless steel LED dome lights (2) over V-berth, (2) in the galley, (1) in the head, (1) in the shower, (1) above companionway (includes a red lens to preserve night vision) (2) above shelter tables
- Vanity light on the mirror in head
- Engine room lights
- Floor-lever cockpit lights as needed – appropriately spaced.
- 1 Spotlight mounted on the bow pulpit – helm and remote control.
WOOD FINISH:
- All interior and exterior teak finished with Epifanes® Satin and Gloss Finish
ELLIS TENDER and DAVITS:
- AB 9AL tender with 9.9 hp Suzuki outboard on a PretoMarine davit system
COMMISSIONING PACKAGE:
- (4) Dock lines
- (4) 8” x 20” inflatable fenders (Gray)
- (1) Boathook
- (12) adult life jackets and a flotation cushion
- (2) 5lb class A, B, and C fire extinguishers, (1) in the cabin, (1) in the shelter
- (1) first aid kit, (1) flare kit, (1) signaling device
- Molded fiberglass boarding steps with non-skid surface
- Complete equipment documentation and service manual file
OTHER:
- Portable propane grill with grill tools.
- (2) Stainless cup holders at Helm and Nav.
- Galley Equipment
Specifications may vary. Information believed to be correct, but not guaranteed. Listings are subject to prior sale, price changes, or withdrawal.