Everything an Ellis Boat should be – classic, sturdy, functional, beautiful, and built with pride. This amazing vessel includes: A generator, heat & air, separate shower, freezer with ice maker, fridge, 3-burner cooktop with oven, teak floors throughout, expansive seating and large-party dining setup with fold-out tables and Ellis Cantilevered Helm & Nav seating, Garmin electronics, shore power, the Evolution Driveshaft System, bow thruster, a powerful Yanmar diesel engine with a skeg-protected 5-blade prop and rudder. The Ellis Boat Company crew, including the designer Donald Ellis, are extremely proud of this yacht. Call Ellis Boat Company directly to schedule an appointment to see this vessel in our showroom. Call (207) 244-9221 (x6) or Email: sales@ellisboat.com
Ellis 36 Express Cruiser
Length overall 40’ 5” • Length on deck 35’10” • Length waterline 33’ 4”
Maximum beam 13’ 2” • Draft (keel) 3’10” • Displacement 16,000 lbs.
Diesel fuel 2 x 105 gallons • Potable water 2 x 50 gallons • Wastewater 1 x 36 gallons
Cruise up to 22 knots • Max speed 25-26 knots
Location: Ellis Boat Company, SW Harbor, ME.
SOLD
Download a Brochure on this Vessel
ELLIS 36 HARDTOP EXPRESS CRUISER SPECIFICATIONS – HULL No. 36032
HULL: • Semi-displacement with integral fiberglass skeg protecting the shaft, prop & rudder • 1° deadrise at transom • ISO NPG gel coat with blister-resistant vinyl ester resin • High-tech composite with stitched biaxial E-Glass construction for superior strength • Vacuum bagged ATC Core-Cell® structural foam core • Stitched biaxial structural E-Glass reinforced stringer system • Gelcoat finished bilges for ease of maintenance • Fiberglass swim platform with solid teak surface • Undermount coated aluminum swim ladder • Linear Polyurethane boot stripe • Metal-free biocide antifouling bottom paint system • Teak Transom with Transom Door • Awlgrip Corinthian Blue, Red Boot, Black Bottom
DECK: • ISO NPG gel coat with vinyl ester resin • High-tech composite with stitched biaxial E-Glass construction for superior strength • Vacuum bagged ATC Core-Cell® structural foam core • Gelcoat non-skid surface • Teak Guards, Rails, and Side-stripe
ENGINE SYSTEM: • 530-hp Yanmar diesel engine with Yanmar warranty through September 2020 • Oil catch basin under engine • 2.5:1 ZF Model 280 transmission • Sealed 2” stainless steel Evolution Quiet Drive shaft system • 26” 5-blade magnesium-bronze propeller • 80-amp, 12-volt alternator • Groco 2” raw water intake strainer • Engine air intake through aft cockpit grills • White gel coat finished engine room • 2″ Soundown™ sound insulation on the main bulkhead, under all floor panels & hatches • All access hatches lined with acoustical gaskets • Engine compartment cooling through side-mounted, molded fiberglass, dorads • All thru-hulls isolated with solid glass to ensure integrity of Core-Cell® core • Ball valve style silicon bronze seacocks with double hose clamps
FUEL SYSTEM: • (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks • 900 Series Racor 30-micron primary fuel filter/water separator • Yanmar 2-micron secondary fuel filter/water separator • (2) 2” 316 polished stainless steel diesel deck fills • USCG approved, fire-resistant fuel hoses with double hose clamps
STEERING SYSTEM: • Marine Hydraulics Hydro-Slave® power steering system • 316 stainless steel rudder (1½” diameter rudder post) • Sidepower® SP55 electric bow thruster with helm control
FORWARD CABIN: • 7′ 6″ V-berth with 6” covered cushions with memory foam & breathable top layer • Teak V-berth trim • Cypress sheathing surrounding V-berth • Drop-in storage compartments under V-berth cushions • Teak drawers and drop-down lockers under V-berth • Chain locker forward with teak louvered door • Large cedar lined hanging locker with 3 shelves, hanger pole & teak louvered door • Fiberglass floor with custom gel coat non-skid surface • Leather grained headliner with teak trim • (2) Bomar hatches with self-contained OceanAir® sunshades and screens • 3.8 cubic foot insulated floor locker with drain between V-berths • 5.25 cubic foot insulated floor locker with drain in center of cabin floor • Solid Teak Cabin Floor • V-berth filler
GALLEY: • Molded fiberglass counter with teak fiddle rail and trim • Hand-polished 304 stainless steel double sink with washerless Moen faucet • Teak drawers and storage lockers below counter • Teak trimmed sliding door storage cabinet • Top Loading Freezer with Ice Maker • 1.2 cubic foot stainless steel convection microwave • 3-burner electric range • (2) teak pot locker drawers • Hot and cold pressurized water • Nova Kool® 12-volt DC/120-volt AC refrigerator with freezer compartment • Custom Ellis designed teak plate and bowl storage rack • Custom Ellis designed teak mug and spice rack • Melamine dinnerware (choice of colors): (8) 12oz mugs, (8) 8” salad plates, (8) 10” dinner plates, (8) 16oz soup bowls • (8) 14oz Makrolon tumblers • (2) 3.3qt, (2) 1.5qt, (2) 0.6qt food canisters, and salt & pepper mills • Teak towel ring
HEAD: • Teak sliding door • Molded fiberglass counter with teak fiddle rail and trim • 13” hand-polished 304 stainless steel sink with washerless Moen faucet • Teak drawers and storage lockers below counter • Teak trimmed sliding door storage cabinet • Teak framed mirror above sink cabinet • Separate molded fiberglass shower with seat • Alsons shower head & mixing valve • Bi-folding ½” clear acrylic shower door • Hot and cold pressurized water • Separate shower sump • (2) stainless steel towel bars
SHELTER: • Express Cruiser hardtop with gelcoat non-skid surface and teak supports • Acoustical headliner with teak trim • (2) Bomar hatches with self-contained OceanAir® sun shades and screens • Stamoid side curtains & three-panel backdrop with eisenglass panels • Teak cap rail • Port and starboard Ellis Cantilevered Hydraulic Seats™ with covered cushions (convert to 2 settees or 2 twin bunks in conjunction with stern seats) • (2) Teak trimmed sliding door storage lockers • Teak companionway doors and cover • Removable teak companionway stairs • (2) 30” x 48” folding teak tables mounted on port and starboard cabin sides • (3) Large (26½” x 61”) engine room hatches w/gas struts, 4” diameter stainless compression latches/hinges (removable hatch irons create a single 86” x 61” opening) • (25” x 25”) shaft access and storage hatch with gas struts, 4” diameter stainless steel compression latch and hinges • (3) front powder coated aluminum opening windshields • (3) 2-speed, self-parking, pantograph windshield wipers with washers • (2) powder coated aluminum side windows • Fiberglass floor with gelcoat non-skid surface • Linear Polyurethane side stripe matching hull color • Solid Teak installed on all floors • Custom Seating with pull-out boarding steps
HELM STATION: • Enclosed cabinet with teak top and fiberglass instrument insert • Teak trimmed electrical, electronics and hydraulic access panel • Side arm cabinet for hydraulic seats and additional electronics • Ellis adjustable teak and hand-polished stainless steel footrest • Single lever control • Engine control panel: o Start/Stop control o Tachometer w/hour meter o Engine temperature o Engine oil pressure o Voltmeter o Water temp and oil pressure alarm • Lighted Ritchie 4½” Binnacle compass • Windlass and air horn controls • Operators electrical control panel • Stazo 24” stainless steel destroyer wheel • Ellis designed “Pump Running Indicator Light System”
NAVIGATION STATION: • Enclosed cabinet with top storage compartment with hinged teak cover • Teak trimmed electrical access panel • Side arm cabinet for hydraulic seats, additional electronics & air conditioning grill • Ellis adjustable teak and hand-polished stainless steel footrest
COCKPIT: • (2) teak folding stern seats with cushions (convert to twin bunks in conjunction with Ellis Cantilevered Hydraulic Seats™) • (3) Large (25½” x 32½”) lazaret hatches with gas struts, 4” diameter stainless steel compression latches and hinges (removable hatch irons create a single 84” x 25½” opening) • (2) teak trimmed sliding door storage lockers • Fiberglass floor with gel coat non-skid surface • SHURflo PRO Blaster™ 3.5 GPM high-pressure pump supplies salt water to bow and cockpit faucets • Additional salt and fresh water faucets in cockpit • Cockpit shower with recessed mixing valve • Solid Teak installed on all floors • Transom Door • Custom Seating with pull-out boarding steps
HARDWARE: • 1″ diameter type 316 stainless steel bow rail • (2) 1″ diameter type 316 stainless steel handrails on cabin top • (2) 1″ diameter type 316 stainless steel handrails on shelter top • (2) 1″ diameter type 316 stainless steel handrails on front corners of shelter • (4) 10” 316 polished stainless steel cleats (2 amidships, 2 aft) • (1) 7” 316 polished stainless steel bow bitt • (2) 6” 316 polished stainless steel skene bow chocks • (2) 316 polished stainless steel fender eyes amidships • Polished stainless steel flagpole holder, ferruled teak flag staff and 3’x5’ U.S. flag • Fiberglass bow pulpit with 316 hand-polished stainless steel anchor roller & windlass • Polished Stainless anchor with 150’ of 5/16” chain and 150’ of 5/8” nylon • (6) polished 316 stainless steel opening port lights with angled spigots and screens • High impact Teak guards and rails with solid polished stainless steel half oval • Added numerous teak and stainless handrails
WASTE DISPOSAL: • 36-gallon holding tank with overboard discharge macerator pump • 1½” Scandvik polished stainless steel deck pump out plate • 12-volt DC marine head w/12-volt vacuum generator • All gray water drainage through 2 isolated thru hulls
FRESH WATER SYSTEM: • (2) 50-gallon water tanks • 12-gallon hot water tank • FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe system • 3.8 GPM 12-volt DC SHURflo water pump • 1½” polished stainless steel deck fill plate
120-VOLT AC ELECTRICAL SYSTEM: • (2) 30-amp 120-volt AC shore power outlets • (2) 50’, 30-amp, shore power cords • Battery charger (20-amp, charges 3 battery banks simultaneously) • Illuminated AC circuit breaker panel with flush breakers and digital monitor • 120-volt GFCI protected outlets (2) in galley, (1) in head and (2) in shelter • 8-kW Fischer Panda Generator • 16kBtu Cruisair Reverse Cycle Air Conditioning
12-VOLT DC ELECTRICAL SYSTEM: • (1) 4D dedicated engine starting battery • (2) 8D deep cycle house batteries • USCG & ABYC approved polyethylene battery boxes • Heavy-duty battery switch with parallel capabilities for emergency starting • Illuminated DC circuit breaker panel with flush breakers and digital monitor • DC subpanel on sidearm at helm • 12-volt DC outlets at helm and navigation stations • 12-volt DC dual trumpet air horn • USCG approved running lights on pulpit • USCG approved 360° masthead light • (3) 750 GPH bilge pumps; (1) located forward of the main bulkhead, (1) in engine compartment just aft of engine, (1) auxiliary pump located just forward of engine. • AGM Batteries
LIGHTING: • 5½” stainless steel dome lights (2) over V-berth, (2) in galley, (1) in head, (1) in shower, (2) in shelter, (1) above companionway (includes red lens to preserve night vision) • Vanity light on mirror in head • (4) engine room lights • (4) cockpit lights • Spotlight with helm control
WOOD FINISH: • All interior and exterior teak finished with Epifanes® Satin (in cabin) or Gloss Varnish.
OTHER: • (4) 5/8”, three strand nylon dock lines • (4) 8” x 20” inflatable fenders with Polartec® covers • (1) boat hook • (6) adult life jackets, (1) flotation cushion • (2) 5lb class A, B and C fire extinguishers, (1) in cabin, (1) in shelter • (1) first aid kit • (1) flare kit • (1) signaling device • Molded fiberglass boarding steps with non-skid surface
ELECTRONICS PACKAGE:
Specifications may vary. Information believed to be correct, but not guaranteed. Listings are subject to prior sale, price changes or withdrawal.