Maintained 100% by Ellis Boat Company, used locally in Southwest Habor and stored annually in Ellis’s indoor heated facility. Pristine condition. Low hours (under 500) on the single 530 Yanmar diesel engine. Currently set up for viewing at Ellis Boat Company. – SOLD
2011 Ellis 36′ Extended Top Cruiser
Length overall 40’ 5” • Length on deck 35’10” • Length waterline 33’ 4”
Maximum beam 13’ 2” • Draft (keel) 3’10” • Displacement 18,000 lbs.
Diesel fuel 210 gallons • Potable water 100 gallons • Wastewater 36 gallons
Cruise 10 to 20 knots • Max speed 25 knots
SOLD
2011 Ellis 36 Extended Top Cruiser
FULL SPECIFICATIONS
HULL:
- Built-down semi-displacement with integral fiberglass skeg protecting shaft, propeller & rudder
- 1° deadrise at transom
- ISO NPG gelcoat with blister-resistant vinylester resin
- High-tech composite with stitched biaxial E-Glass construction for superior strength
- Vacuum bagged ATC Core-Cell® structural foam core
- Stitched biaxial structural E-Glass reinforced stringer system
- Gelcoat finished bilges for ease of maintenance
- Fiberglass swim platform with gelcoat finished non-skid surface
- Undermount coated aluminum swim ladder
- Awlgrip® boot stripe
- Unepoxy antifouling bottom paint under contrasting ablative bottom paint
DECK:
- ISO NPG gelcoat with vinylester resin
- High-tech composite with stitched biaxial E-Glass construction for superior strength
- Vacuum bagged ATC Core-Cell® structural foam core
- Gelcoat finished non-skid surface
ENGINE SYSTEM:
- 530-hp Yanmar diesel engine (less than 500 hrs)
- Oil catch basin under engine
- ZF transmission
- Sealed 2” stainless steel Evolution Quiet Drive shaft system
- 26” 5-blade magnesium-bronze propeller
- 80-amp, 12-volt alternator
- Groco 2” raw water intake strainer
- Engine air intake through aft cockpit grills
- White gelcoat finished engine room
- 2″ Soundown™ sound insulation on main bulkhead, under all floor panels & hatches
- All access hatches lined with acoustical gasketing
- Engine compartment cooling through side-mounted, molded fiberglass, dorads
- All thru-hulls isolated with solid glass to insure integrity of Core-Cell® core
- Ball valve style silicon bronze seacocks with double hose clamps on all hoses
FUEL SYSTEM:
- (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks
- 900 Series Racor 30-micron primary fuel filter/water separator
- Yanmar 2-micron secondary fuel filter/water separator
- (2) 2” Scandvik 316 polished stainless steel diesel deck fills
- USCG approved, fire resistant fuel hoses
STEERING SYSTEM:
- Marine Hydraulics Hydro-Slave® power steering system
- 316 stainless steel rudder (1½” diameter rudder post)
- IMTRA SP55 electric bow thruster with helm control
FORWARD CABIN:
- 7′ 6″ V-berth with 6” Sunbrella® covered cushions with memory foam and a breathable top layer
- Teak V-berth trim
- Cypress sheathing surrounding V-berth
- Drop-in storage compartments under V-berth cushions
- Teak drawers and drop-down locker doors under V-berth
- Chain locker forward with teak louvered door
- Large cedar-lined hanging locker to starboard with 3 shelves, hangar pole and teak louvered door
- Fiberglass floor with Gelcoat finished non-skid surface
- Leather grained headliner with teak trim
- (2) Bomar hatches with self-contained OceanAir® sunshades and screens
- 8 cubic foot insulated floor locker with drain between V-berths
- 25 cubic foot insulated floor locker with a drain in the center of the cabin floor
- ADDED: Solid Teak floor
- NOTE: Pillows NOT included with sale
GALLEY:
- Molded fiberglass counter with teak fiddle rail and trim
- Scandvik hand-polished 304 stainless steel double sink with washerless Moen faucet
- Teak drawers and storage locker doors below counter
- Teak trimmed sliding door storage cabinet
- Top loading pot storage locker
- Panasonic 1.2 cubic foot stainless steel convection microwave
- Princess Euro 3-burner electric cooktop
- (2) teak pot locker drawers
- Hot and cold pressurized water
- Nova Kool® 12-volt DC/120-volt AC refrigerator with freezer compartment
- Custom Ellis designed teak plate and bowl storage rack
- Melamine dinnerware (choice of colors): (8) 12oz mugs, (8) 8” salad plates, (8) 10” dinner plates, (8) 16oz soup bowls
- (8) 14oz Makrolon tumblers
- (2) 3.3qt food canisters, (2) 1.5qt food canisters, (2) 0.6qt food canisters, and salt & pepper mills
- Teak towel ring
- ADDED: Top loading freezer
HEAD:
- Teak sliding door
- Molded fiberglass counter with teak fiddle rail and trim
- Scandvik 13” hand-polished 304 stainless steel sink with washerless Moen faucet
- Teak drawers and storage locker doors below counter
- Teak trimmed sliding door storage cabinet
- Teak framed mirror above sink cabinet
- Separate molded fiberglass shower with seat
- Alsons shower head & mixing valve
- Bi-folding ½” clear acrylic shower door
- Hot and cold pressurized water
- Separate shower sump
- (2) stainless steel towel bars
SHELTER:
- Extended hardtop with gelcoat finished non-skid surface and teak supports
- Acoustical headliner with teak trim
- (2) Bomar hatches with self-contained OceanAir® sun shades and screens
- Port and starboard Ellis Cantilevered Hydraulic Seats™ with Sunbrella® covered cushions
- L-shaped settee/berth with storage beneath (dependant on floor plan)
- (2) teak trimmed sliding door storage lockers
- Teak companionway doors and cover
- Removable teak companionway stairs
- (2) 30” x 48” folding teak tables mounted on port and starboard cabin sides
- (3) Large (26½” x 61”) engine room hatches with gas struts, 4” diameter stainless steel compression latches and hinges (removable hatch irons create a single 86” x 61” opening)
- (25” x 25”) shaft access and storage hatch with gas struts, 4” diameter stainless steel compression latch and hinges
- (3) front powder coated aluminum opening windshields
- (3) 3-speed, self-parking, pantograph windshield wipers with washers
- (6) powder coated aluminum side windows
- Enclosed aft shelter with sliding door
- Fiberglass floor with gelcoat finished non-skid surface
- Exterior Awlgrip® side stripe matching hull color
- ADDED: Solid Teak floor and Teak side strip (exterior P&S, varnished)
HELM STATION:
- Enclosed cabinet with teak top and fiberglass instrument insert
- Teak trimmed electrical, electronics and hydraulic access panel
- Ellis adjustable teak and hand-polished stainless steel footrest
- Stainless steel single lever control
- Engine control panel:
- Start/Stop control
- Tachometer w/hour meter
- Engine temperature
- Engine oil pressure
- Voltmeter
- Water temp and oil pressure alarm
- Lighted Ritchie 4½” Binnacle compass
- Windlass and air horn controls
- Operators electrical control panel
- Stazo 24” stainless steel destroyer wheel
- Ellis designed “Pump Running Indicator Light System
NAVIGATION STATION:
- Enclosed cabinet with top storage compartment with hinged teak cover
- Teak trimmed electrical access panel
- Ellis adjustable teak and hand-polished stainless steel footrest
COCKPIT:
- (3) Large (25½” x 32½”) lazaret hatches with gas struts, 4” diameter stainless steel compression latches and hinges (removable hatch irons create a single 84” x 25½” opening)
- (2) teak trimmed sliding door storage lockers
- Fiberglass floor with gelcoat finished non-skid surface
- SHURflo PRO Blaster™ 3.5 GPM high pressure pump supplies salt water to bow and cockpit faucets
- OPTIONS: Transom Door, Aft Bimini, and St. Croix Davits with tender added
DECK HARDWARE:
- 1″ diameter type 316 hand-polished stainless steel bow rail
- (2) 1″ diameter type 316 hand-polished stainless steel hand rails on cabin top
- (2) 1″ diameter type 316 hand-polished stainless steel hand rails on shelter top
- (2) 1″ diameter type 316 hand-polished stainless steel hand rails on front corners of shelter
- (4) 10” 316 polished stainless steel cleats (2 amidships, 2 aft)
- (1) 7” polished stainless steel bow bitt
- (2) 6” 316 polished stainless steel skene bow chocks
- (2) polished stainless steel fender eyes amidships
- Polished stainless steel flagpole holder, ferruled teak flag staff and 3’x5’ U.S. flag
- Fiberglass bow pulpit with 316 hand-polished stainless steel anchor roller and Lewmar windlass
- 33lb Bruce anchor with 150’ of 5/16” chain and 150’ of 5/8” nylon
- (6) polished 316 stainless steel opening port lights with angled spigots and screens
- VARNISHED TEAK guards and rails with solid polished stainless steel half oval
WASTE DISPOSAL:
- 36-gallon holding tank with macerator pump overboard discharge
- 1½” Scandvik polished stainless steel deck pump out plate
- Sealand Model 547 12-volt DC VacuFlush® marine head with 12-volt vacuum generator
- All gray water drainage through 2 isolated thru hulls
FRESH WATER SYSTEM:
- (2) 50-gallon water tanks
- 12-gallon stainless steel hot water tank
- FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe work system
- 8 GPM 12-volt DC SHURflo water pump
- 1½” Scandvik polished stainless steel deck fill plate
120-VOLT AC ELECTRICAL SYSTEM:
- Panda generator (8kw)
- (2) 30-amp 120-volt AC shore power outlets
- (2) 25’, 30-amp, shore power cords
- Xantrex Truecharge 20+ charger (20-amp, charges 3 battery banks simultaneously)
- Illuminated AC circuit breaker panel with flush breakers and digital monitor
- 120-volt GFCI protected outlets (2) in galley, (1) in head and (2) in shelter
- ADDED: Air Conditioning System
12-VOLT DC ELECTRICAL SYSTEM:
- (1) 4D dedicated engine starting battery
- (2) 8D deep cycle house batteries
- USCG & ABYC approved polyethylene battery boxes
- Heavy-duty battery switch with parallel capabilities for emergency starting
- Illuminated DC circuit breaker panel with flush breakers and digital monitor
- DC sub panel at helm
- 12-volt DC outlets at helm and navigation stations
- 12-volt DC dual trumpet air horn
- USCG approved running lights on pulpit
- USCG approved 360° masthead light
- (3) ¾” 750 GPH RULE Mate “Dry bilge” ™ bilge pumps; (1) located forward of main bulkhead, (1) in engine compartment just aft of engine, (1) auxiliary pump located just forward of engine.
LIGHTING:
- 5½” stainless steel dome lights (2) over V-berth, (2) in galley, (1) in head, (1) in shower, (2) in shelter, (1) above companionway (includes red lens to preserve night vision)
- Scandvik 17¾” Xelogen vanity light on mirror in head
- (4) engine room lights
- (4) cockpit lights
- Guest spot light with helm control
ADDED OPTIONS INCLUDE:
Awgrip Hull – Dark Green H4024
Privacy Curtain between galley & V-berths
Cutters to shaft
Teak Rails & Guards
Groco Electric head (changed from Vacuflush system)
8 quick-catch fender eyes
2 additional vertical handrails at aft ends of the cabin
P&S aft spreader lights
Elk hide covering to Stazo 24” wheel
Teak on the swim platform
Electronics package: Raymarine 120W system with autopilot, plotter & radar, separate rudder indicator, and fathometer, Icom VHF and Stereo System – Poly-Planar MR50 with 4 Speakers
Specifications may vary. Information believed to be correct, but not guaranteed. Listings are subject to prior sale, price changes or withdrawal.